Research India Publications



International Journal of Dynamics of Fluids (IJDF)


Editorial Board Members:-


Dr. Chiranth Srinivasan, Senior Engineer, Simerics, Inc., Technology By Design

Area of Interest : Fluid Physics, Fluid Dynamics And Thermodynamics


Vivek P K, Instructor, Department of Engineering, Ibra College of Technology, Sultanate of Oman.
Area of Interest : Electronics and Communication Engineering, Signal Processing, Embedded Systems and Communication Engineering

Fikret Alic, Associate Professor, Department of Thermal and Fluid Technique, Faculty of Mechanical Engineering Tuzla, Department of Thermal and Fluid Technique, Univerzitetska 475000 Tuzla, Bosnia and Herzegovina
Area of Interest : Entropy generation. Thermal & Hydraulic Irreversibility, Heat Transfer, Infrared Thermography, Experimental and Computational Fluid Dynamics


You Ruquan, National Key Laboratory of Science and Technology on Aero-Engines, Aero-thermodynamics, Beihang University, P.R China.
Area of Interest: Experimental techniques in fluid flow and heat transfer, Turbulence Modeling, Turbulent boundary layer flow.

Huijin Xu, Shanghai Jiao Tong University, China.
Area of Interest: Heat and Mass Transfer, Porous Media, Thermal Storage.



Shaaban A. Abdallah, Department of Aerospace Engineering & Engineering Mechanics, University of Cincinnati, Cincinnati, OH  45221-0070 USA

Field of expertise: computational fluid dynamics, propulsion, and aeroacoustics.


Sumanta Acharya, Turbine Innovation & Energy Research Center, Mechanical Engineering department, Louisiana State University, Baton Rouge, LA 70803 USA

Field of expertise: computational & experimental fluid dynamics, heat transfer and combustion. Application of specific interest include Turbine blade cooling, and gas turbine combustion.


Ramesh K. Agarwal, Department of Mechanical & Aerospace Engineering, Washington University in St. Louis, Campus Box 1185, 1 Brookings Drive, St. Louis, MO 63130, USA

Field of expertise: Fluid Dynamics at all Speeds,  CFD


Ibrahim A. Ahmad, Department of Statistics & Actuarial Science, University of Central Florida, Orlando, FL 32816-2370 USA

Field of expertise: Nonparametric and Semiparametric Statistics and Econometrics, Actuarial Science, Reliability and Life Testing, Applied Probability.


Abdullah M. Al-Garni, Dept. of Aerospace Engineering, KFUPM, P. O Box 1513, Dhahran 31261, Saudi Arabia

Field of expertise: Low speed aerodynamics, wake flows, flow field measurements, experimental techniques, flow control.


Yiannis Andreopoulos, Dept. of Mechanical Engineering, The City College of The City University of   New York, Convent Ave. & 138th Street, New York, New York 10031, USA

Field of expertise: Low and high speed turbulence. Gas dynamics, aerodynamics, acoustics. Transport phenomena in fluid mechanics. Jet, wakes and boundary layers.


Sayavur Bakhtiyarov, New Mexico Institute of Mining and Technology, 122 Weir Hall, 801 Leroy Place, Mechanical Engineering Department, New Mexico  Tech, Socorro, NM 87801-4796, USA
Field of expertise:
Fluid Mechanics, Viscous Fluid Flow, Non-Newtonian Fluid Mechanics, Rheology, Turbulent Flow, Two-Phase Flow, Flow Measurement, Computational Fluid Dynamics, Heat Transfer.


Rachid Bennacer, LEEVAM-LMSC, Université de Cergy Pontoise, 5, Mail Gay Lussac, Neuville sur Oise, 95031 Cergy-Pontoise Cedex, France.

Field of expertise: Double diffusion, thermosolutale, Natural convection, Phase change, Porous Media.


Alistair G L Borthwick, Department of Engineering Science, University of Oxford, Parks Road, Oxford OX1 3PJ, U.K.

Field of expertise: fluid mechanics, thermodynamics, mathematics, civil engineering hydraulics, engineering hydrology, water engineering, and coastal & offshore engineering.


Ivan Catton, Department of Aerospace and Mechanical Engineering, School of Engineering and Applied Science, University of California, Los Angeles, California 90095-1597 USA.

Field of expertise: Fluid mechanics, heat and mass transfer, porous media, experimental fluid and heat flow, non-invasive experimental methods, nuclear engineering.


Li Cheng, Research Centre on Noise Abatement and Control, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong .

Field of expertise: Sound and vibration and, fluid-structure interaction, smart materials and structure, damage detection, control of solid and fluid systems.


Ching-Yao Chen, Dept. of Mechanical Engineering, National Yunlin University of Science & Technology, 123, Section 3, University Road, Touliu, Yunlin, Taiwan, 640 R.O.C.

Field of expertise: CFD, Miscible Fluids, Magnetic Fluids, Viscous Fingering, Hele-Shaw Flows.


Jyh-Yuan Chen, Mechanical Engineering, 6163 Etcheverry Hall, University of California, Berkeley, CA 94720-1740, U.S.A

Field of expertise: Modeling of turbulent reacting flows (RANS and LES), Joint Probability density function approaches, Reduced Chemistry.


Philip Cunningham, Department of Meteorology & Geophysical Fluid Dynamics Institute, The Florida State University, Tallahassee, FL 32306 USA

Field of expertise: Meteorology and atmospheric fluid dynamics, Geophysical and environmental fluid dynamics, Dynamics of geophysical vortices.


Marcelo J.S. De Lemos, Departamento de Energia – IEME, Instituto Tecnológico de Aeronáutica – ITA, Pça. Mal. Eduardo Gomes, n° 50, 12228-900 São José dos Campos, SP Brazil

Field of expertise: Turbulence Modeling, Porous Media, Numerical Methods, Finite Volume.


Peter J. Disimile, Aerospace Engineering, University of Cincinnati, Cincinnati,Ohio 45221-0070 USA 

Field of expertise: Experimental techniques in fluid mechanics and heat transfer, Turbulent flows, Vorticity transport and mixing, Fire suppression and spray transport.  


Dimitris Drikakis, Head of Fluid Mechanics and Computational Science, Cranfield University, School of Engineering, Cranfield, Befordshire, MK43 0AL, United Kingdom 

Field of expertise: Computational Fluid Dynamics, Aerodynamics, Turbulence Gas dynamics, omputational Nanotechnology, Microflows Biofluid Mechanics, Transport Phenomena.


Christoph Egbers, Department of Aerodynamics and Fluidmechanics, Brandenburg University of Technology, Cottbus, Siemens-Halske-Ring 14, D-03044 Cottbus, Germany

Field of expertise: Experimental aerodynamics, boundary layers, compressible flows, convective heat transfer, rotating fluid flows, geophysical fluid flows, foam dynamics, flows in biological systems, fluid-structure interaction.


A.H. Elkholy, Mechanical Engineering Department, Kuwait University, P.O.Box 5969, Safat 13060, KUWAIT

Field of expertise: Applied Mechanics, Machinery, Machine Design, Manufacturing.


Mohammad Faghri, Department of Mechanical Engineering, University of Rhode Island, Wales Hall, 92 Upper College Rd., Kingston, RI 02881, U.S.A.


Nikita Fomin, Heat and Mass Transfer Institute, Belarus Academy of Science, 15, P. Brovki, Minsk, 220072, Belarus

Field of expertise: Shock tube study of chemical and physical kinetics, mixing and combustion in supersonic flows, gasdynamic lasers and diagnostics.


Jamshid Ghaboussi, Dept. of Civil and Environmental Engineering, 3118 Newmark Civil Engineering Laboratory, MC-250, 205 N. Mathews Ave., Urbana, Illinois 61801, USA


Carl H. Gibson, Departments of Mechanical and Aerospace Engineering and Scripps Institution of Oceanography, Center for Astrophysics and Space Sciences, University of California at San Diego, La Jolla CA 92093-0411 USA

Field of expertise: turbulence, turbulent mixing, oceanographic and atmospheric flows, and cosmological and astrophysical flows.


Marcela Beatriz Goldschmit, Head of Computational Mechanics, Center for Industrial Research, B2804MHA Campana, ARGENTINA

Field of expertise: Computational Fluid Mechanics, Turbulent Flow Models, Multiphase Flow Numerical Models, Bubbly Flow Numerical Models, Computational Heat Transfer.


Oskar J. Haidn, German Aerospace Center (DLR), Institute of Space Propulsion, Head Technology, 74239 Lampoldshausen, Germany 

Field of expertise: High Pressure Reacting Flows, Nozzle Flow Phenomena, Flow Visualization, Flow in Porous Media.


Yousef Haik, Department of Mechanical Engineering, United Arab Emirates University, PO BOX 17555, Al Ain, UAE

Field of expertise: biological systems, biomagnetic fluids, computational fluid mechanics, microfluidics.


Mahmoud Hamadiche, Laboratoire de mecanique des fluides et d'acoustique, Ecole Centrale de Lyon, UMR CNRS 5509,36 avenue Guy de Collongue, 69131 Ecully CEDEX, FRANCE

Field of expertise: fluid/structure interaction, absolute and convective instability analysis , biomedical flow and acoustic radiation.


Kemal Hanjalić, Delft University of Technology, Dept. of Applied Physics, 2614 TD Delft, The Netherlands 

Field of expertise: Turbulence and turbulent flows, Convective heat transfer, Modelling and simulation (RANS, LES, Hybrid methods)  

Michael S. Howe, Boston University Collage of Engineering, 110 Cummington St, Boston MA 02215, USA 

Field of expertise:


Matjaž Hriberšek, Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia

Field of expertise: Computational fluid dynamics, iterative solvers, process engineering.


Chin-Tsau Hsu, Department of Mechanical and Aerospace Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong

Field of expertise: : Flows and Heat & Mass Transfer in Porous Media, Experimental and Computational Fluid Dynamics, Energy Technology, Wave Dynamics and Coastal Engineering.


Robert R. Hwang, Institute of Physics, Academia Sinica, Taipei, Taiwan

Field of expertise: Vortex Dynamics; Turbulent Diffusion Process; Fluid Mechanics; Wave Mechanics.


Marc S. Ingber, Mechanical Engineering Department, The University of New Mexico, Albuquerque, NM 87131, USA

Field of expertise: Hydrodynamic stability, stratified flows, multiphase flows, vorticity methods, acoustics, and computational fluid mechanics.


M.M. El-Khayat, NREA, P.O.Box 4544 Masakin Dobat El-Saff, El-Hay El-Sades, Nasr City, Cairo, Egypt.

Field of expertise: Energy and Renewable Energies, Environment Studies, Economical Studies, Computer Programming Languages, Fluid Mechanics, and Numerical Analysis.


Seppo A. Korpela, Professor Emeritus Department of Mechanical and Aerospace Engineering 201 W. 19th Avenue Columbus, OH 43210

Field of expertise: Convection, Hydrodynamic Stability, Computational Fluid Dynamics, Turbomachinery.


Tomasz A. Kowalewski, IPPT PAN, Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warszawa, Poland

Field of expertise: Free surface flow, drops, liquid jets, flow of suspensions and emulsions, boiling, natural convection without and with phase change, experimental methods, validation of numerical simulations, nanofibres, fluid mechanics of atmospheric problems.


Hendrik Kuhlmann, Institute of Fluid Mechanics and Heat Transfer, Vienna University of Technology, Resselgasse 3/1/2, 1040 Vienna, Austria


José L. Lage, Director, Laboratory for Porous Materials Applications, Mechanical Engineering Department, Southern Methodist University, Dallas, TX 75275-0337 USA

Area of Research: heat transfer, biomedical engineering (gas exchange, bio-flows)


Jure Marn, Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia

Field of expertise: Nuclear engineering, two phase flows, non Newtonian flows.  


Antonio Carlos Mendes, Universidade da Beira Interior, Dep. Electromechanical Eng., R. Marques d'Avila e Bolama, 6201-001 Covilha,Portugal.

Field of expertise:Hydrodynamics 


Abdulmajeed Mohamad, Dept. of Mechanical and Manufacturing Engineering, The University of Calgary, Calgary, Alberta, T2N 1N4, Canada

Field of expertise: Fluid Flow, Heat and Mass Transfer, Computational fluid dynamics, computational methods, Porous media, Lattice Botlzmann Method, Molecular Dynamics simulations, Modeling. Multi-phase flows.  


Najem M. Al-Najem, Department of Mechanical Engineering, Kuwait University, P.O. Box 5969, Safat 13060 Kuwait. 

Area of Expertise/Interest: Inverse Heat Transfer, Computational Fluid, dynamics in Falling Films and Closed and Open Cavities.


J. Prieur du Plessis, Dept. of Applied Mathematics, Faculty of Engineering, University of Stellenbosch, Private Bag X1, 7602 Matieland, SOUTH AFRICA

Field of expertise: Fluid dynamics and heat transfer, transport in porous media, computational fluid dynamics, viscous flow, non-Newtonian flow. 


Henry Power, School of Mechanical, Materials and Manufacturing Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD, UK


K.R. Rajagopal, 230A Engineering/Physics Building Office Wing, Texas A&M University, College Station, TX 77843, USA
Field of expertise: mechanics of fluids and mixtures, elasticity, nonlinear analysis.


A. Heitor Reis, Physics Department, University of Évora, R. Romao Ramalho, 59, 7000-671 Évora, Portugal.

Field of expertise: Thermodynamics and dynamics of fluids in porous media and biologic structures; atmospheric physics.


Albert Ruprecht, Institute of Fluid Mechanics and Hydraulic Machinery, University of Stuttgart, Pfaffenwaldring 10, 70550 Stuttgart, Germany


Fulvio Scarano, TU Delft, Aerospace Engineering, Aerodynamics Section, Kluyverweg 1, 2629HS Delft, Netherland
Field of expertise: aerodynamics and experimental measurement techniques.  


Ronald M. C. So, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, HONG KONG 

Field of expertise: fluid mechanics with special interests in turbulence and its modeling, gas turbine aerodynamics, fluid-structure interaction, aeroacoustics and its interaction with structures, aerodynamics of combustion, and pollutant dispersion in the atmosphere.


Alfredo Soldati, Dipartimento di Energetica e Macchine, Centro Interdipartimentale di Fluidodinamica e Idraulica, Università degli Studi di Udine, Italia


Martin Sonnenkalb, Head of Barrier Effectiveness Department, GRS gGmbH, 50667 Cologne, Schwertnergasse 1, Germany
Field of expertise: Nuclear engineering, severe accidents, analytical and computational methods and applications.  


M.Y.E. Selim, Mechanical Engineering Department, Faculty of Engineering, UAE University,  Jimi, Al-Ain P.O.Box 17555 United Arab Emirates

Field of expertise: Turbulent flow, turbulent combustion, internal combustion engine flow and combustion, turbulence measurements and decay.


Mohamed Selmi, Department of Mechanical Engineering, University of Qatar, P. O. Box 2713 Doha, Qatar


Antonio C.M. Sousa, Department of Mechanical Engineering, University of New Brunswick, Fredericton, NB, Canada E3B 5A3


Jan Vierendeels, Department of Flow, Heat and Combustion Mechanics, Ghent University, St.-Pietersnieuwstraat 41, 9000 Ghent, Belgium

Field of expertise: Computational Fluid Dynamics, algorithms, fluid-structure interaction, biomedical applications (blood flow)


Luiz C. Wrobel, Department of Mechanical Engineering, Brunel University, Uxbridge UB8 3PH, Middlesex, UK


Prof Dr Zulkifli Yusop, Dean of Research Water Research Alliance UTM, Malaysia.


Dr. Tachtouch Bourhan, Department of Thermofluid Science. King Fahd University of Petroleum and Minerals. Dhahran 31261, Saudi Arabia.


Dr. Abdul Razak Rehmat, Associate Prof. Department of Polymer Engineering. Universiti Teknologi Malaysia. Skudai, Johor, Malaysia


Ahmed Sahin, Professor of Mechanical Engineering King Fahd University of Petroleum and Minerals Dhahran 31261, Saudi Arabia


Prof. Abdullah M. Al-Shaalan, EE department College of Engineering P.O. Box 800 King Saud University Riyadh-11421, Kingdom of Saudi Arabia


M. A. Habib,Professor, Mechanical Engineering Department, King Fahd University of Petroleum and Minerals. Dhahran 31261, Saudi Arabia.


Dr. Jamel Orfi,  Mechanical Engineering Department College of Engineering, King Saud University, PO Box 800, Riyadh, 11421, KSA


Khaled S. Al-Salem, Mechanical Engineering Department College of Engineering Riyadh 11421 King Saud University, Saudi Arabia


Dr. M. Venkata Ramana, Microscopy and Nano Tech Laboratory Dept. of Metallurgical and Materials Engineering Indian Institute of Technology Madras Chennai 600 036, India


Srinivasan Chitra, Physics Department, Sri Para sakthi College For women,Courtallam Tirunelveli, Tamil Nadu,India.
Area of Interest: Computational material science, thermal properties, Monte Carlo simulation, Molecular dynamics,Metropolis algorithm, phase transition study by simulation, alloy simulation, transport properties , Debye temperature, specific heat capacity study by simulation


Rajiv Kumar Mandal, Department of Metallurgical Engg., IT-BHU University/Department: Banaras Hindu University Department of Met.Engg. IT-BHU Varanasi, Uttar Pradesh, India

Area of Interest: Phase transformation,Nanomaterials,micrstructural evolution,quasicrystals


Dr. J. P. Panda, Mathematics Department, Govt. College of Engineering, KJR(Biju Patnaik University of Technology), Jamunalia, Keonjhar-758002, Odisha, India

Area of Interest: Fluid Dynamics, Mass Transfer, Heat Transfer, MHD Flow, Numerical Method


Gamal Mohamed Abdel-Rahman Rashed, Mathematics (Applied of Mathematics), Benha University, Faculty of Science, Department of Mathematical, Benha-13518, Egypt

Area of Interest: Computational (Fluid Mechanics, Thin Film, Nanofluids, Heat transfer, Magnetohydrodynamic )


Prof. Muhammad Raheel Mohyuddin, M & S Department, Caledonian College of Engineering 2322, Al-Hail South 111,Seeb Sultanate of Oman

Field of expertise: Fluid Mechanics.







© All rights are reserved with Research India Publications                             Home  Journals  Contact