Research India Publications



International Journal of Mechanics Solids (IJM&S)



Editorial Board Members:


Prof. Dr. Mohd Khanapi Abd Ghani, Professor, Faculty of Information and Communication Technologies, Universiti Teknikal Malaysia Melaka, Malacca, Malacca, Malaysia
Area of Interest : Health informatics and Sorftware engineering

Dr. Dada Emmanuel Gbenga, Senior Lecturer, Department of Computer Engineering, Faculty of Engineering, University of Maiduguri, P.M.B 1069, Maiduguri, Borno State Nigeria
Area of Interest : Soft-computing Techniques, Machine Learning Algorithms, Image Segmentation, Swarm Robotics, Cyber Security and Big Data Analytic


Dr. MARCO JAVIER SUAREZ BARON, Professor, Assistant Research, , Calle 66 A # 9-36 Tunja Colombia
Area of Interest : Machine learning, data science, Artificial intelligence, Natural Language Processing

Dr. Almir Osmanovic, Assistant Professor, Faculty Of Mechanical Engineering Tuzla, Mašinski fakultet Tuzla, Univerzitetska 4, 75000 Tuzla Bosna i Hercegovina / Bosnia and Herzegovina.
Area of Interest : Mechatronic, Automatic Control, Fluid power system


Dr. Mohit B.Diwan, Assitant Professor, Tatva Institute of Technological Studies, Modasa, Gujarat, India.

Area of Interest : Manufacturing and Design & Development



Jamil Abdo, Mechanical and Industrial Engineering Department, Sultan Qaboos University, P. O. Box 33, Al-koud 123, OMAN

Area of Research/Interest: Friction-Induced Vibration, Elastic-Plastic contact Problems, micromechanics, Friction and Wear Control of Friction Induced Noise and Vibration in Vehicles and Machines.


Osama Abuzeid, Department of Mechanical Engineering, United Arab Emirates University, PO BOX 17555, Al Ain, UAE

Area of Research/Interest: Advanced production techniques of metallic and non metallic thin films and their industrial applications.


Unal Aldemir, Istanbul Technical University, Division of Applied Mechanics, 34469 Maslak-Istanbul, Turkey
Area of Research/Interest: Structural dynamics, Vibration control, Earthquake engineering, Offshore Structures, Energy dissipation mechanisms.


Whye-Teong Ang, Division of Engineering Mechanics, School of Mechanical and Production Engineering, Nanyang Technological University, 50 Nanyang Drive, Singapore 639790

Area of Research/Interest: boundary element methods, Green's function approach in mechanics, computational techniques and modeling of heat and mass transfer.


Gyula Beda, Department of Applied Mechanics, Technical University of Budapest, Hungary
Area of Research/Interest: Theoretical and experimental investigation of plastic wave, the possible constitutive equations of non-polar and micropolar continuous media, large deformation of solids, the generalized principle of virtual work, the generalized D'Alembert equation, thermomechanical waves.


James Boyle, Chair, Mechanical Engineering Department, University of Strathclyde, UK 

Area of Research/Interest:


Halil Ceylan, 482B Town Engineering Bldg., Iowa State University, Ames, IA 50011-3232 USA

Area of Research/Interest: Pavement Analysis and Design, Computational Intelligence Applications/Information Technology in Civil Engineering, Materials and Construction Optimization of PCC Materials, Curling and Warping Behavior of Concrete Slabs.


David Chelidze, Mechanical Engineering and Applied Mechanics, 203 Wales Hall, 92 Upper College Road, University of Rhode Island, Kingston, RI 02881 USA
Area of Research/Interest: Analytical and experimental nonlinear dynamics, failure mechanics, modal testing and analysis, dynamics and stability of engineered systems.


Li Cheng, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong

Area of Research/Interest: Sound and vibration and, fluid-structure interaction, smart materials and structure, damage detection, control of solid and fluid systems.


Leon Cizelj, Institut "Jožef Stefan", Reactor Engineering Division, Jamova 39, 1000 Ljubljana, Slovenia

Area of Research/Interest: Computational structural and fracture mechanics, Micromechanics and multiscale modeling, Probabilistic fracture mechanics and structural reliability.


Ottavia Corbi, Dip.Scienza delle Costruzioni, via Claudio 21, 80125 Napoli, Italy 

Area of Research/Interest: seismic engineering, structural dynamics,structural control, masonry structures.


Prabir Daripa, Department of Mathematics, Texas A&M University, College Station, TX-77843, USA 

Area of Research/Interest: Fluid/Solid Mechanics, Bio-Mechanics, Scientific Computing, and Applied Mathematics.


M. Dhanasekar (Sekar), Director - Centre for Railway Engineering, Central Queensland University, Rockhampton, QLD 4702, Australia

Area of Research/Interest:


Mohammad Reza Eslami, Mechanical Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave. Tehran 15914 Iran

Area of Research/Interest:


Vincenzo Gattulli, DISAT, Universitŕ di L'Aquila, 67040 Monteluco di Roio, L'Aquila, Italy. 

Area of Research/Interest: Dynamics and Earthquake Engineering, Nonlinear Dynamics, Computational Mechanics, Structural Identification and Reliability, Damage identification and health monitoring, Linear, Nonlinear and Adaptive Control Theory.


Somnath Ghosh, Department of Mechanical Engineering, Suite 255, 650 Ackerman Road, Columbus, OH 43202 USA

Area of Research/Interest: Computational Mechanics with focus on materials analysis, characterization and processing, including simulation and design.


Abdul Hayir, Istanbul Technical University, Civil Engineering Faculty, Division of Mechanics, 34469, Maslak, Istanbul Turkey 
Area of Research/Interest: Wave Propagation in elastic and inelastic solids, Elasto Dynamics, Tsunamis, Wave Propagations in Fluid, Dynamic Soil Structure Interaction, Earthquake Engineering.


Christian Hellmich, Vienna University of Technology, Institute for Mechanics of Materials and Structures, Karlsplatz 13/202, A-1040 Wien (Vienna) Austria

Area of Research/Interest: biomechanics, continuum micromechanics, nano-to-macro scale transitions, multiphysics and multiscale problems, experimental and theoretical [bio]chemomechanics of concrete, steel, soil, rock, wood, bone.


Y.S. Ho, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong.

Area of Research/Interest: Hydrostatic Bearings, Active Magnetic Bearing System, Rotordynamics, Acoustic Emission,  Flowmeter Modelling.


K. Jimmy Hsia, Department of Theoretical and Applied Mechanics, University of Illinois at Urbana-Champaign, 104 South Wright Street, Urbana, IL 61801 USA

Area of Research/Interest: Mechanics at small length scales, material deformation and failure mechanisms, high temperature failure of materials, dislocations, dynamic fracture.


G.N. Jazar, 207A-RLC, Department of Mechanical Engineering, Manhattan College, Riverdale, NY 10471 USA

Area of Research/Interest: Dynamics and Stability of MEMS and Mechatronics, Dynamics and Vibrations of Nonlinear Systems, Dynamics, Handling, Ride, and Stability of Vehicle, Chaotic Motions in Vibrating systems.


Norman Jones, Department of Engineering, The University of Liverpool, Brownlow Hill, Liverpool, England 

Area of research/Interest: Structural Crashworthiness, Dynamic Plastic Response of structures, Impact Behavior of Energy Absorbing Systems.  


M. A. Karkoub, Mechanical Engineering Department, Kuwait University, P.O. Box 5969. Safat 13060. Kuwait. 

Area of research/Interest: Vibration control, Robotics, control of mechanical systems, application of artificial intelligence to mechanical systems.


Ahmed Adel Khdeir, Mechanical Engineering Department, College of Engineering, King Saud University, P. O. Box 800, Riyadh 11421, Saudi Arabia

Area of research/Interest: Theories of Plates, Shells, Beams and Arches, Thermoelastic Behavior of Composite Structures, Stochastic and Dynamic Responses of Laminated Composite Structural Systems, Vibrations and Nonlinear Oscillations of Continuous and Discrete.


Vladimir Kompis, Faculty of Mechanical Engineering, University of Zilina, Univerzitna 1, Sk-010 26 Zilina, Slovakia 
Area of Research/Interest: Trefftz FEM, BEM, meshless, composite and nano materials, local effects.


Christopher Y. Leung, Department of Civil Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong

Area of Research/Interest: Construction materials, Mechanics of fiber composites, Fracture mechanics, Optical fiber sensors, Application of composites in civil engineering.  


Zongjin Li, Department of Civil Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong

Area of Research/Interest: Durability of concrete; development of high performance concrete; fiber reinforced concrete, fracture of concrete; nondestructive testing in civil engineering.


Yiu-Wing Mai, School of Aerospace, Mechanical and Mechatronic Engineering J07, The University of Sydney, Sydney, NSW 2006, Australia 

Area of Research/Interest: Fracture & Fatigue; Advanced Materials-polymer blends, composites, ceramics, construction materials, thin films and coatings; Tribology.


Herbert A. Mang, Vienna University of Technology, Institute for Mechanics of Materials and Structures, Karlsplatz 13/202, 1040 Wien, Austria 

Area of Research/Interest: Mechanics of deformable solids, structural mechanics, computational mechanics, computational acoustics, multifield analysis, multiscale analysis. 


Mohammad Megahed, CAPSCU, Faculty of Engineering, Cairo University, Giza, P.O. 12163, Egypt
Area of Research/Interest: Plasticity, Fatigue, Creep of Structures, Finite Element, Pressure Vessels, Failure Analysis, Fracture Mechanics.


Ali Meghdari, Distinguished Professor of Mechanical Engineering, Vice-President of Academic Affairs, Sharif University of Technology, Tehran 11365, Iran

Area of Research/Interest:: Kinematics & Dynamics of Multibody Systems, Robotics & Control, Mechanisms Design, Automated Manufacturing and Production; Dual-Arm & Flexible, Manipulator Dynamics, Mechatronics, Biomechanical Systems and Bio-Robotics.


Yoshihiro Narita, Div. of Mechanical Science, Graduate School of Engineering, Hokkaido University, N13 W8, Kita-ku, Sapporo, 060-8628  Japan

Area of Research/Interest: Optimum design, Composite structure, Vibration and Buckling of plates and shells.


Tang-Tat (Percy) Ng, Department of Civil Engineering, University of New Mexico, Albuquerque, NM  87131 USA

Area of Research/Interest: Computational Mechanics (Discrete Element, Finite Element, and Finite Difference), Constitutive Relations, and Dynamics.


K.K. Pathak, Scientist & Advisor, Computer Simulation & Design Group, Advanced Materials and Processes Research Institute (CSIR), Bhopal 462026 (MP) INDIA 

Area of Research/Interest: Computational solid mechanics, metal forming and casting simulations, structural shape optimization, artificial intelligence techniques.


Tasneem Pervez, Head, MIE Department, College of Engineering, Sultan Qaboos University, Oman 

Area of Research/Interest: 


Fabrice Poirion, ONERA (French Aeronautics and Space Research Center), DDSS, 29 Ave de la division Leclerc, BP 72 ;  92322 Chatillon, France 

Area of Research/Interest: stochastic dynamics, nonlinear dynamics, Monte Carlo simulation techniques, structural uncertainty, nonsmooth mechanics.


John Price, Mechanical Engineering Department,

Area of Research/Interest: Structural integrity including fracture mechanics, design, manufacture, welding, pressure and transport equipment, thermal shock, industrial explosions, risk assessment and maintenance.


K.R. Rajagopal, 230A Engineering/Physics Building Office Wing, Texas A&M University, College Station, TX 77843, USA
Area of Research/Interest: mechanics of fluids and mixtures, elasticity, nonlinear analysis.


J.N. Reddy, Engineering Department, Texas A&M University, College Station, Texas, USA

Area of Research/Interest: Formulation and analysis of problems in continuum mechanics, solid and structural mechanics, computational fluid mechanics, computational heat transfer, computational solid mechanics, and applied mathematics.


Jeremiah J. Rushchitsky, S.P.Timoshenko Institute of Mechanics of the National Academy of Sciences of Ukraine, Nesterov str. 3, Kyiv, 03680, Ukraine

Area of Research/Interest: Mechanics of solids in several directions, mechanics of nano- and micro-composite materials, linear and nonlinear waves in materials with internal structure, visco- and piezo-elasticity, wavelet analysis as applied to wave propagation.


R. Seshadri, Memorial University of Newfound land, Canada

Area of Research/Interest:


Jian-Fu Shao, Laboratory of Mechanics of Lille – Polytech-Lille, University of Sciences and Technologies of Lille, 59655 Villeneuve d'Ascq, Cedex, France

Area of Research/Interest: constitutive law, plasticity, damage, numerical modeling, geomechanics, poromechanics.


Zbigniew H. Stachurski, Director, Centre for Science and Engineering of Materials, c/o Department of Enigneering, bldg 32 Australian National University, Canberra, ACT Australia

Area of Research/ Interest: Mechanics and Solids.


James J-S Stone, Mechanical Engineering & Applied Mechanics, North Dakota State  University, Fargo, ND 58105, USA 
Area of Research/Interest: Biomedical Engineering, Biomechanics, Nanotechnology, Experimental-Computational Solid Mechanics, Design/Analysis of Implants, Materials, Laser Metrology, Frictional Contact Problems & Material Testing.


Andras Szekeres, Dept. Applied Mechanics, TU Budapest, Muegyetem 5, H-1111, Budapest, Hungary 

Area of Research/Interest: Thermo-hygro-mechanics and its application to composites.


Gyorgy Szeidl,Department of Mechanics,University of Miskolc, Miskolc-Egyetmeváros, Hungary

Area of Research/Interest: Nonlinear Solid Mechanics (Continuum Mechanics), micropolar theory of elasticity, boundary element method.


Ala Tabiei, Department of Aerospace Engineering, The University of Cincinnati, Post Box 210070, Cincinnati, OH 45221-0070 USA

Area of Research/Interest: Smart composite material modeling for extreme deformation, strength, and experimental evaluation. Computational mechanics.


Derin N. Ural, Istanbul Technical University, Department of Civil Engineering, Geotechnical Division, Maslak 80626 Istanbul – Turkey

Area of Research/Interest: Modeling soils and analyzing their behaviour during dynamic loading, wave propagation, vibrations, stochastic mechanics, and optimization.  


Abdallah S. Wifi, Department of Mechanical Engineering, The American University in Cairo, Egypt 

Area of Research/Interest: Applied Plasticity and Metal Forming, Workability and Formability of Metals, Manufacturing Processes Engineering.


Volkmar Zabel, Bauhaus-University Weimar, Faculty of Civil Engineering, Institute of Structural Mechanics, Marienstr. 15, 99421 Weimar, Germany 
Area of Research/Interest: Structural dynamics, Application of wavelet analysis in structural mechanics, Structural damage detection, Structural health monitoring, System identification.


Mariusz Ziejewski, Department of Mechanical Engineering, North Dakota State University, Fargo, North Dakota 58105 USA
Area of Research/Interest:
Mild traumatic brain injury, traumatic brain injury, trauma biomechanics, impact biomechanics, biomechanical risk factors, brain modeling, brain substitute material, human body kinematics.


Prof Dr Zulkifli Yusop, Dean of Research Water Research Alliance UTM, Malaysia.


Tachtouch Bourhan, Department of Thermofluid Science. King Fahd University of Petroleum and Minerals. Dhahran 31261, Saudi Arabia. 


Abdul Razak Rehmat, Associate Prof.  Department of Polymer Engineering. Universiti Teknologi Malaysia. Skudai, Johor, Malaysia


M. A. Habib, Professor, Mechanical Engineering Department,
King Fahd University of Petroleum and Minerals. Dhahran 31261, Saudi Arabia


Prof. Abdullah M. Al-Shaalan, EE department College of Engineering P.O. Box 800 King Saud University Riyadh-11421, Kingdom of Saudi Arabia


Adel Taha Mohamed Abbas, Associate Professor of Computer Aided Design& Manufacturing  Mechanical Engineering Department, College of Engineering King Saud University , Riyadh, Saudi Arabia, 11421, P.O.Box 800


M. Venkata Ramana, Microscopy and Nano Tech Laboratory, Dept. of Metallurgical and Materials Engineering Indian Institute of Technology Madras Chennai 600 036,  India


Damodar Maity, Civil Engineering Department Indian Institute of Technology Associate Professor, Civil Engineering Department, Indian Institute of Technology, Kharagpur, West Bengal, India - 721302. West Bengal  Kharagpur  721302  India 
Area of Research/Interest: Damage Assessment of Structures; Seismic Resistant of Structures; Fluid-Structure Interaction; Sloshing; Concrete Gravity Dam.


Mohammad Amin Horiri Ardebili, Civil Envoronmental and Architectural Engineering (CEAE) University of Colorado at Boulder, Colorado, Boulder,USA
Area of Research/Interest: Concrete dams; Fluid-structure-interaction; Earthquake engineering; PBEE; Special structures.


Pankaj,  Mathematics Indus International University Bathu, Una Himachal Pradesh India
Area of Interest: Solid Mechanics, Elastic, Plastic, Creep, Thermal Stresses, Applied Mathematics. 


Rajiv Kumar Mandal, Department of Metallurgical Engg., IT-BHU University/Department: Banaras Hindu University Department of Met.Engg. IT-BHU Varanasi, Uttar Pradesh, India

Area of Interest: Phase transformation,Nanomaterials,micrstructural evolution,quasicrystals


V. Balakrishna Murthy, Mechanical Engineering Department, V. R. Siddhartha Engineering College, Kanuru, Vijayawada, Andhra Pradesh, India
Area of Interest: Advanced Solid Mechanics, Mechanical Vibrations, Experimental Stress Analysis, Finite Element Analysis, Fracture Mechanics, Analysis of FRP Composites, Analysis of Nano Composites.


Jianlin Liu, Department of Engineering Mechanics, China University of Petroleum, No. 66, Changjiang West Road, Qingdao Economic & Technological Development Zone, Qingdao, China
Area of Interest:
Surface Wetting; Elasto-capillarity; Soft matter; Continuum Mechanics


Dr. P. Rathish Kumar, Civil Engineering Department, National Institute of Technology (NIT) Warangal-506 004, Andhra Pradesh, India
Area of Interest: Alternate/New Building Materials, Recycling of concrete, Self Compacting Concrete, Structural Dynamics, Earthquake Engineering, Structural Health Monitoring, Ferrocement and Fibrous Concretes.






© All rights are reserved with Research India Publications                             Home  Journals  Contact