International Journal of Theoretical and Applied Mechanics (IJTAM)


Volume 12, Number 3  (2017)





Effect of Tooling Parameters on Bending Force in Air Bending of CR4 steel
pp. 375-388
Tilak Raj Gupta and H.S Payal

The Literature Review of Lean and Green Manufacturing System
pp. 389-393
Vasdev Malhotra and Sameer Kumar

Relationship between Emotional Intelligence and Job Performance of Software Professionals of Trivandrum Technopark, Kerala, India
pp. 395-404
Sanjay B1 and Jubi R

Evolution of Microstructure and Hardness of Aluminium 6061 after Friction Stir Welding
pp. 405-410
Ch.Mohana Raoa and K.Mallikarjuna Rao


The Effect of Air Preheating on the performance and emission characteristics of a DI Diesel Engine achieving HCCI mode of combustion
pp. 411-421
Sumanlal M. R., Sreeram Nandakumar and Mohanan P

Maintenance Challenges of Wankel Rotary Engines and utility in Aviation Applications
pp. 423-434
K Subash, Vinu R and K Vijayaraja

Linearly Distributed Time Harmonic Mechanical and Thermal Sources Effect at Transversely Isotropic Thermoelastic Solids with Two Temperatures and without Energy Dissipation
pp. 435-443
Parveen Lata

Influence of Tool Geometry on Material Flow Pattern in Friction Stir Welding Process
pp. 445-458
Pavan Kumar Thimmaraju, Krishnaiah Arakanti and G.Chandra Mohan Reddy

Transformation of Diesel Engine to Dual Fuel Engine Using Injector Nozzle of Multi Holes Geometries: A review
pp. 459-472
Patel Nimit M and A.D.Patel


Effect of Process Parameters on Metallurgical and Mechanical Properties of Friction Stir Welded Aluminum Alloys
pp. 473-484
M.S. Srinivasa Rao, B.V.R. Ravi Kumar and M. Manzoor Hussain

Design of Ionofree Micro Strip Quad Helix Antenna for Global Positioning System
pp. 485-495
Jesavath Kiran Naik¹ and S Muruganand

Effect of Aspect Ratio on the Performance of Hydrodynamic Journal Bearing Operating Under Wear
pp. 497-522
Sanjay Sharma and R K Awasthi

Optimisation of 16cm2 Single Pass Serpentine Flow Channel of PEMFC Using Taguchi Method
pp. 523-532
V. Lakshminarayanan and Bala Karthick K.S


Numerical Analysis of Soil-Water Flow in Fixed Horizontal Pipe
pp. 533-541
ManjitSingha, Sandeep Jindala, Amit Guptaa and Virender Chahal

Agriculture Productivity Enhancement System using IOT
pp. 543-554
T.Satish, T. Bhavani and Shameena Begum

Thermodynamic (Energy-exergy) Analysis of Hydrogen Liquefaction System
pp. 555-561
Devender Kumar and R.S Mishra

Thermodynamic (Exergy-energy) Analysis of a Low Pressure Improved Claude Cycle Using Control Volume Technique For Liquefaction of Gases
pp. 563-570
Devender Kumar and R.S Mishra

Estimation of Soil Moisture Content: A Review
pp. 571-577
Saima Ansari and Ratnadeep R. Deshmukh

Effect of Change in Process Parameters on Energy Consumption during Textile Dyeing Process
pp. 579-588
Kuldip Arun Rade, Vilas A. Pharande and Daulat. R. Saini

Sliding Mode Control of MERS for Brightness Control of Discharge Lamps with Unity Power Factor
pp. 589-597
M.Vijayasanthi and M. Sushama

Effect of Porous Medium on Thermo-Hydraulic Performance of Micro Channel Heat Sink
pp. 599-612
Saravanan Va and C. K. Umesh


Thermal Performance Analysis to Assess Inhabitant Comfort inside LIG houses in Chhattisgarh
pp. 613-622
Nisha Netam, Shubhashis Sanyal and Shubhankar Bhowmick

Generation of Manipulability Ellipsoids for Different Configurations Using the Yoshikawa’s Manipulability Index and Manipulability Ellipsoid
pp. 623-635
A. Chandrashekhar and Garlanka Satish Babu

Effect of Temperature and other factors on Anaerobic Digestion Process, responsible for Bio Gas Production
pp. 637-657
Gurinderpal Singh, V.K. Jain and Amanpreet Singh

Corrosion Behaviour of Nickel Coated Short Carbon Fiber Reinforced Al Metal Matrix Composites
pp. 659-669
Nithin Kumar, H. C. Chittappa, Ravikiran Kamath B and S. Ezhil Vannand


Corrosion Behaviour of Nickel Coated Short Carbon Fiber Reinforced Al Metal Matrix Composites

pp. 659-669

Nithin Kumar, H. C. Chittappa, Ravikiran Kamath and S. Ezhil Vannand


Analysis of factors affecting the Lean and Green Manufacturing Systems by ISM approach

pp. 671-675

Dr. VasdevMalhotra and SameerKumar




© All rights are reserved with Research India Publications                             Home  Journals  Contact